PE · EVA
Standard PE/EVA Black Masterbatch
What is Standard PE/EVA Black Masterbatch?
Our flagship carbon black masterbatch is built on an LDPE/LLDPE/EVA carrier with ISAF, HAF, or combined carbon black at 30–45% CB content. It is the workhorse grade for the majority of polyethylene and EVA processing.
Available in filler-free (high-purity) and filler grades, it delivers deep, uniform black, high opacity and clean dispersion in blown and cast film, agricultural film, injection molding, pipe extrusion and cable jacketing.
Which applications is it best for?
| Application | Why this grade fits |
|---|---|
| Blown & cast film | Clean dispersion, high opacity at 2–3% loading |
| Injection & blow molding | Uniform jet-black, stable melt flow |
| Pipe & profile extrusion | Full opacity, smooth interior surface |
| Cable jacketing | Compatible with PE cable systems |
Key Features
- ISAF / HAF / combined carbon black for tunable jetness
- Filler-free high-purity and economical filler grades
- High-intensity two-stage twin-screw dispersion
- Recommended addition rate 1–4%
Why choose ZFH for this masterbatch?
- Verified compliance — SGS-tested to RoHS (EU) 2015/863, EN 71-3:2019+A2:2024 and REACH SVHC; FDA / GB grades available.
- Dispersion you can rely on — two-stage high-intensity twin-screw extrusion for consistent jetness and clean filtration.
- Made to order — carbon black loading, carrier resin and additive package tuned to your line.
- Engineered per polymer — matched carriers for PE, PP, EVA, ABS, PC, PA and POM.
- Documentation on request — TDS, SGS reports and samples for qualification before first order.
FAQ
What addition rate should I use for ZFH Standard PE/EVA black masterbatch?
A typical addition rate is 1–4%, depending on the opacity required, the base resin and the processing method. Higher-CB grades reach full opacity at the lower end of that range.
Representative Grades
| Code | Resin | CB Type | CB % | Filler | Add. Rate |
|---|---|---|---|---|---|
| ZFH-VA2030 | EVA | ISAF + HAF | 30% | — | 1–4% |
| ZFH-VA2030A | EVA | P-type | 30% | — | 1–4% |
| ZFH-6030F | LLDPE | ISAF | 32% | ✓ | 1–4% |
| ZFH-650 | LLDPE | ISAF | 35% | ✓ | 1–4% |
| ZFH-6035A | LLDPE | ISAF | 38% | — | 1–4% |
| ZFH-6066A | LLDPE | ISAF | 40% | ✓ | 1–4% |
| ZFH-6090 | LLDPE | HAF | 40% | — | 1–4% |
| ZFH-550 | LLDPE | ISAF | 40% | ✓ | 1–4% |
| ZFH-6040B | LLDPE | ISAF + HAF | 40% | ✓ | 1–4% |
| ZFH-VA2040 | EVA | ISAF + HAF | 40% | ✓ | 1–4% |
| ZFH-6042 | LLDPE | ISAF | 42% | — | 1–4% |
| ZFH-6046 | LLDPE | ISAF | 43% | — | 1–4% |
| ZFH-6045P | LDPE + LLDPE | P-type | 45% | — | 1–4% |
| ZFH-6045 | LDPE + LLDPE | ISAF | 45% | — | 1–4% |
| ZFH-VA2045 | EVA | ISAF + HAF | 45% | — | 1–4% |
| ZFH-3300 | LLDPE | ISAF | 48% | — | 1–4% |