Engineering Plastics Series
Engineering Plastics Masterbatch (SAN/PC/PA/ABS/POM)
Resin-matched black masterbatch for PA, ABS, PC, SAN, POM and other engineering plastic applications.
Product Overview
ZFH Black Masterbatch for Engineering Plastics is developed for a wide range of engineering resins, including PA, ABS, PC, SAN, POM and others. With carefully selected carbon black and resin-matched carriers, it provides stable blackness, good dispersion and consistent performance in engineering plastic applications.
Different engineering plastics have different characteristics and processing requirements. ZFH provides tailored solutions to help customers achieve the right balance of appearance, processability and mechanical properties.
Key Features
Formulated for different engineering resins
Good melt flow and processing stability
Uniform dispersion and consistent appearance
Helps maintain mechanical and functional properties
Tailored to your resin, product and requirements
Typical Applications
Widely used in engineering plastic parts where appearance, purity and mechanical performance matter.
Automotive components, functional parts, industrial parts, etc.
Device housings, office equipment, industrial electronics, etc.
Electrical connectors, precision parts, etc.
Appliance components, structural parts, etc.
Available Resin Systems or Representative Directions
Different engineering plastics have different characteristics. The following are typical resin systems and product directions. Customized solutions are available upon request.
| Grade | Resin System | Product Direction | Carbon Black | Typical Application | Key Point | Note |
|---|---|---|---|---|---|---|
| ZFH-PA600 | PA (Nylon) | PA black masterbatch | 40% | Automotive parts, connectors | Aniline black, balanced blackness and mechanical properties | Different PA grades may require different solutions |
| ZFH-ASS02 | AS (ABS / AS / PS) | ABS black masterbatch | 40% | Electronic housings, appliance parts | Good dispersion, stable processing | Consider heat and impact requirements |
| ZFH-PC600 | PC + rPC | PC black masterbatch | 33.5% | Optical / electrical parts, housings | High purity, low impurities | Focus on appearance and property balance |
| ZFH-AS3081 | AS (SAN) | SAN black masterbatch | 35% | Appliance panels, electronic products | Good compatibility | Tailored to the specific grade |
| ZFH-POM20 | POM | POM black masterbatch | 23% | Precision parts, gears | Stable processing, consistent appearance | Consider processing temperature and wear |
| ZFH-GC8019C | CPE (for PVC) | Customized solutions | 40% | According to customer requirements — PVC compounding, injection, footwear | Good dispersibility, no caking, high blackness | Recommended dosage 4–10%; other resins on request |
The above are representative directions, not a specification. The full range spans 20–40% carbon black across PA, AS/SAN, PC, rPC, rSAN, POM and CPE carriers with high color black, aniline black, jet black and ISAF systems. Exact specifications are available on request, and custom grades can be developed for your resin and requirements.
Why Choose ZFH?
Since 2007 in masterbatch
In-house QC and strict control
Application guidance and custom solutions
Serving customers worldwide
FAQ
1.Which engineering resins are supported?
This series is intended for engineering plastics such as PA, ABS, PC, SAN and POM. Different resin systems have different processing temperatures, viscosity and compatibility requirements, so the recommended masterbatch grade should be selected according to the specific base resin and application.
2.Can the masterbatch affect mechanical properties?
Yes, depending on the carrier system, carbon black level, addition rate and compatibility with the base resin. For engineering plastics, improper carrier selection may affect impact strength, tensile properties, surface quality or dimensional stability. Our recommendation focuses on achieving the required blackness while minimizing unnecessary impact on the finished product.
3.Can you provide customized formulations?
Yes. Formulations can be adjusted according to the base resin, processing method, target blackness, surface requirement and end-use performance. For PA, PC, ABS, SAN or POM applications, different carrier or compatibility strategies may be used rather than one universal formulation.
4.How do I choose the right product for my application?
Please consider the base resin, processing temperature, melt-flow characteristics, part thickness, surface appearance and mechanical-property requirements. For applications with higher appearance or property requirements, we recommend evaluating the masterbatch in the customer's actual resin and processing conditions before final approval.
5.Do you provide samples and TDS?
Yes. Samples and technical data sheets can be provided for applicable grades. Please share your resin type, processing method and target requirements so we can recommend a more suitable sample for evaluation.
6.What information do you need for a quotation or recommendation?
Please provide the base polymer, resin grade if available, processing method, current addition rate, product type, target blackness and any special requirements such as gloss, dispersion, mechanical-property retention or electrical performance. Existing samples or technical data can also help us make a more accurate recommendation.
Need Help Choosing the Right Solution?
Tell us your application, and our team will recommend a suitable solution.
Within 24 hours
Get professional support